http://www.weldengineering.com/
Over 30 years of experience in manufacturing the most complete line of Submerged Arc Flux handling equipment.
Products categories:：
| - Standard Duty | - Heavy Duty | - Pressure Feed | - Auto mixing | - Re-bake ovens |
Key products:
Standard Duty Flux Recovery
Mighty Might AP-1,Mighty Might SUPER-AP-1,A/P-1-E/P (auto transfer)
 |
AIR POWERED INEXPENSIVE, RUGGED, AND POWERFUL; THE AP-1 MOUNTS EASILY ONTO MOST AUTOMATIC SUBMERGED ARC WELDING EQUIPMENT. ADDS NO OIL OR WATER TO THE FLUX AND PRODUCES NO DAMAGE TO THE RECOVERED FLUX PARTICLES, SINCE FLUX IS NEVER IN COMPRESSED AIR STREAM. VACUUM AIR PUMP IS ON EXHAUST SIDE AND UNDESIRABLE CONTAMINANTS, FINES AND DUST ARE DISCHARGED INTO A VERY EFFICIENT DUST BAG ASSEMBLY. NO MOVING PARTS IN AIR PUMP, AND NO INTERNAL FILTERS TO WEAR OUT. VERY EFFICIENT PUMP PRODUCES A HIGHER VACUUM, USES LESS AIR, AND IS QUIETER THAN MOST COMPETITIVE MODELS. |
Heavy Duty Flux Recovery
Mighty Mac 1500X Mighty Mac 3000X Mighty Mac 5000X Mighty Mac 1500X/P
 |
HIGH TECHNOLOGY, VACUUM SENSING LOGIC AUTOMATICALLY CLEANS DUST-CLOGGED FILTERS. 1.5 HP TEFC MOTOR DIRECTLY COUPLED TO BLOWER. DIRTY FILTERS ARE AUTOMATICALLY CLEANED DUST IS AUTOMATICALLY COLLECTED IN LARGE DUST DRAWER "MICRON" CARTRIDGE DUST FILTERS EASILY REPLACED SUPER DUTY VACUUM BLOWER/TEFC MOTOR AND NO V-BELTS BLOWER TURNS AT LOW SPEED FOR LONG BEARING LIFE HIGH ABRASION WEAR POINTS LARGE GAUGE ON CONTROL PANEL DESIGNED FOR CONTINOUS DUTY, HIGH DEMAND FLUX RECOVERY. |
